Levitating Minimal Lamp

Light up your home with Levitating Cube Lamp, a desk piece where a translucent 3D printed cube floats above a wooden-tone base, suspended in mid-air by a magnetic levitation module hidden inside the housing. The cube and the base both come straight off your printer, so the entire piece is fully 3D printable from start to finish. For makers who want to push the edition further, the base is also offered as an optional CNC file, ready to be carved from a block of walnut.

Design & Concept

I designed this lamp around the idea that the base should be the hero, not the same generic black plastic block you see on most levitating lamps. The cube shader is printed in translucent filament for a soft, evenly diffused glow, and a small walnut-tone collar sits between the cube and the floating field to anchor the silhouette visually. The base houses the magnetic levitation module entirely inside its 3D printed shell, so once printed and assembled the piece is a complete desk object, with no extra woodworking required. For the makers who own a desktop CNC, I am also including an optional CNC file of the base, so it can be carved from solid walnut for a one-of-one wood edition.

Key Features:

Magnetic Levitation: The cube shader floats above the base with no contact, suspended by a magnetic levitation module seated inside the lower housing.
Fully 3D Printable: Every structural part comes off the printer. No woodworking, no extra fabrication, just print and assemble.
Translucent Cube Shader: A 3D printed diffuser that glows evenly across all four faces, finished with a matching walnut-tone collar.
Two-Tone Scandi Minimal: Warm wooden tones paired with a soft white translucent shader, designed to sit quietly on a desk or shelf.
Optional CNC Base: A bonus CNC file is included for makers who want to carve the base from solid walnut, turning the lamp into a one-of-one wood edition.

Printing Recommendations:

Cube Shader:

Material: Translucent White PLA for a clean diffused glow.
Vase Mode (Spiralize Outer Contour): Recommended for an even, seamless light wash on all four faces.

Base:

Material: Walnut-tone wood-fill PLA recommended to keep the warm two-tone aesthetic. Standard PLA in a warm brown tone also works.

Commercial License

The downloaded files are for personal use only. If you are interested in selling physical prints of this design, please visit www.collecticraft.co to find details about my commercial license and subscription plans.

家居装饰 CNC 项目

峰顶小屋 - 激光图像

多材质时钟

3只火烈鸟

塞尔达传说：姆吉拉的假面 胡桃木杯垫

玫瑰花框

第二版铜镜

罗马柱

蓝色贝壳警告标志

比特币冰箱贴

自由安雅

木碗配黄铜锦鲤

悬浮式极简灯

云纹灯

快递外卖请放门口｜ABS金色板门牌

铜镜

4 个哈利波特杯垫

雪山墙画

三角形储物架 - 组装

圆形木质杯垫

旅行路线图冰箱贴

塞尔达传说：姆吉拉的假面胡桃木杯垫