This bat-shaped pendant can be customized through different finishing techniques—such as painting, staining, or applying wood wax—and paired with various cords or chains to create a wide range of distinctive finished looks.

Apply double-sided tape to the back of the 3mm thick acrylic sheet, align it with the backrest, and firmly attach it to the base plate.

Stack the sheet material on top of the acrylic sheet, clamp and secure it, and execute the 19-6_F3.175T1E0.2T2B1T3F2.5T4_1.nc file.

After machining the positioning holes, insert two positioning pins (4*20) and begin machining the back side, executing the file 19-6_F3.175T1E0.2T2B1T3F2.5T4_2.nc.

Rough finishing effect on the back

Finished effect of back surface finishing

Flip the sheet over and align it with the positioning holes, ready for clamping (keep the acrylic sheet stationary).

Clamp the sheet metal and begin machining the front side, executing the file 19-6_F3.175T1E0.2T2B1T3F2.5T4_3.nc.

*If the board material interferes with the backing, remove the backing.

front roughing effect

Front finishing effect

Final processing result